Taking a reading
Wind the watch fully, go somewhere quiet, and hold the bottom edge of your iPhone (where the microphone is) firmly against the case back. Tap Start and keep still. Dialed works out the beat rate by itself; if you know it, you can choose it under Auto BPH. A reading settles in 10 to 30 seconds.
If the reading won't settle
- Background noise: talking, a fan or traffic can drown out the ticks. Try a quieter room.
- Contact: press the phone more firmly against the case back, or lay the watch dial down on a soft cloth with the phone on top of it.
- Quiet movements: some watches tick very softly. Wired EarPods or a USB-C microphone held against the case back often pick them up better; choose the microphone on the Measure screen.
- Bumps: knocking the phone or the watch shows up as noise. Dialed ignores short knocks, but a steady hold gives the cleanest reading.
What the numbers mean
Rate is how many seconds a day the watch gains (+) or loses (−) in the position you measured. Beat error is how unevenly the balance swings each way, in milliseconds; under 0.6 ms is usually fine. Amplitude (Pro) is how far the balance swings, in degrees. It depends on the movement's lift angle: Dialed uses the published figure where there is one and tells you when it is assuming one. Amplitude is shown as a preview while we check it against hardware timegraphers.
A watch runs differently dial up, dial down and crown up, down, left or right. The six-position test measures all six and gives the average and the spread between them.
Can't find your watch?
Use “Can't find your watch?” in the watch search to send us the model and reference, and we'll add it. You can always type the calibre and beat rate yourself.
Purchases
Dialed is free for unlimited readings and one watch. Pro is a single payment of £14.99 with no subscription, shared through Family Sharing. To restore Pro on a new device, use Settings → Restore Purchases.
iCloud sync
With Pro, your collection syncs through your own iCloud account to every iPhone and iPad signed in to it. Make sure each device is signed in to the same Apple Account with iCloud on. We can't see your data and can't recover it for you; it lives only on your devices and in your iCloud.
Contact
Email support@daemonworks.app and say which device and version of Dialed you're using (Settings → About). If a reading looks wrong, Share Recording on the Measure screen lets you send us the sound so we can check it.